Klean-Strip Non-Meth Chloride Paint Remover Aerosol

Klean-Strip Non-Meth Chloride Paint Remover Aerosol professional grade paint stripper is specifically designed to remove 2K automotive coatings including urethanes and tough epoxies. It effectively removes finishes from aluminum , metal and most plastic surfaces.  Effective on acrylics, baked enamels, lacquers, polyurethanes and epoxies. VOC Compliant in all states. Always check local regulations.

DIRECTIONS FOR USE:
 1. Mask seams and trim openings. This will prevent bleed-back stripping of the new finish.
 2. Shake well. Hold can in an upright position and point the arrow on top of the button away from you. Spray at a distance of approximately 8" to 12" from the surface. To avoid sagging on vertical surfaces, use a back and forth motion to apply a generous, even coat. Apply to one section at a time, up to 3 ft. x 3 ft. 
3. Allow the remover to work until the finish is blistered or softened completely, generally within 45 minutes. 
4. Remove paint with a flexible plastic scraper then wipe with a damp cloth to remove any residue. Allow the surface to dry before applying a new finish. Prime metal as soon as possible to prevent flash rust.