Skip to content
Welcome to the Automotive Art Suriname webshop! All prices are BTW Inclusive and available for purchase in Suriname only.
Welcome to the Automotive Art Suriname webshop! All prices are BTW Inclusive and available for purchase in Suriname only.
Klean-Strip Non-Meth Chloride Paint Remover Aerosol

Klean-Strip Non-Meth Chloride Paint Remover Aerosol

by Automotive Art Suriname
SRD 962,50 - SRD 962,50
SRD 962,50
SRD 962,50 - SRD 962,50
SRD 962,50

Klean-Strip Non-Meth Chloride Paint Remover Aerosol professional grade paint stripper is specifically designed to remove 2K automotive coatings including urethanes and tough epoxies. It effectively removes finishes from aluminum , metal and most plastic surfaces.  Effective on acrylics, baked enamels, lacquers, polyurethanes and epoxies. VOC Compliant in all states. Always check local regulations.

DIRECTIONS FOR USE:
 1. Mask seams and trim openings. This will prevent bleed-back stripping of the new finish.
 2. Shake well. Hold can in an upright position and point the arrow on top of the button away from you. Spray at a distance of approximately 8" to 12" from the surface. To avoid sagging on vertical surfaces, use a back and forth motion to apply a generous, even coat. Apply to one section at a time, up to 3 ft. x 3 ft. 
3. Allow the remover to work until the finish is blistered or softened completely, generally within 45 minutes. 
4. Remove paint with a flexible plastic scraper then wipe with a damp cloth to remove any residue. Allow the surface to dry before applying a new finish. Prime metal as soon as possible to prevent flash rust.